Uncut Guide to Resolve TP-Link Firmware Update Failure Issue

Not being able to perform TP-Link repeater firmware update has left many users worried as it disables them from seeing their devices function to their full potential. Also, it prevents them from fixing issues, in case they are facing any with their devices.

Are you also not able to update the firmware of your wireless repeater by accessing the tplinkrepeatersetup.net login page? If you are nodding your head in yes, relax. Take a deep breath and walk through this post. Here, we have talked about some troubleshooting hacks following which, you will surely be able to say goodbye to the issue at hand. Read on.

(Resolved) TP-Link Firmware Update Failed

  1. Reboot Your TP-Link Repeater

Rebooting is one of the easiest ways to get rid of technical issues. Many users have tried this hack. You should consider taking its help to fix the issue you are currently facing.

Follow the steps mentioned below and learn how to reboot your wireless repeater:

  • Disconnect your TP-Link repeater connected to the host router.
  • Power off your repeater and unplug it from its power socket.
  • Wait for about a few seconds.
  • Plug your repeater back into its power socket and switch it on.
  • Reconnect your TP-Link repeater to your home router.

Now, try to update the firmware of your TP-Link wireless repeater to the latest version.

  1. Verify the Ethernet Connection

If you are still unable to perform TP-Link repeater firmware update, it might be because of an unstable Ethernet connection.

Therefore, check the Ethernet cable connecting your repeater and the host router. If it is damaged from anywhere, replace it with a new one or connect your devices wirelessly.

Note: If you use a new cable to connect your devices, make sure that the connection between them is not loose.

  1. Pull Your WiFi Devices Closer

Another thing that might be stopping you from updating the firmware is the distance between your TP-Link wireless repeater and home router. It is probably too much.

To troubleshoot the issue, unplug your repeater from the power socket that it is currently plugged into and plug it into the one located somewhere near the host router.

Precaution: Do not place your wireless devices too close to each other. Otherwise, their signals might clash and cause a ruckus.

  1. Keep WiFi Interference at Bay

Your TP-Link wireless repeater should not be placed anywhere near these things: cordless phones, washing machines, baby monitors, Bluetooth speakers, mirrors, fish tanks, treadmills, televisions, refrigerators, microwave ovens, and utensils containing water.

Apart from this, whether you have performed TP Link AC1200 setup, or configured any other repeater, avoid placing it in corners and near thick concrete walls.

  1. Download the Correct Version

Chances are that you have downloaded the wrong firmware version for your TP-Link wireless repeater which has caused this mess.

Therefore, the next time you try to update the firmware of your WiFi device, make sure that you are downloading the correct version. Otherwise, get ready to face much bigger issues than the one you are currently stuck with.

  1. Reset Your TP-Link Repeater

Are you still unable to perform TP-Link repeater firmware update? Well then, try the ultimate hack, i.e. resetting your wireless device to the factory default settings.

Follow the instructions mentioned below and learn how to reset your WiFi device:

  • Make sure that your repeater is getting an uninterrupted power supply.
  • Once assured, locate the Reset button on your TP-Link wireless device.
  • Once located, carefully press it and hold on for some time.

As soon as you are done resetting your repeater, reconfigure it. What happened? Are you not sure about the TP-Link repeater setup process? In that case, it is recommended that you refer to the user manual.

Once you are done following these steps, try to update the firmware of your TP-Link wireless repeater immediately.

Wrap Up

With that, we are concluding our guide on troubleshooting the TP Link repeater firmware update failure issue. If after following the hacks mentioned above, you are not able to update the firmware of your wireless device with ease, consider opting for the TP Link Tether app for the same purpose.

By 12disruptors Admin

Leave a Reply

Your email address will not be published. Required fields are marked *