Resolved: Linksys Extender Firmware Update Failure Issue

Trying to update the firmware of your Linksys WiFi range extender but a failure message continues to annoy you? If yes, let’s ease out the worry lines on your forehead. Here, in this piece of writing, you will be taken through some tested and proven troubleshooting tips to resolve the Linksys extender firmware update failure issue in a fly. Here we go!

Linksys extender firmware update failed issue can appear due to technical glitches with your desktop/ laptop, WiFi connection, network security, corrupted firmware file, or with your own range extender. Don’t sweat over it! Have a quick glance at some basic reasons why your Linksys extender firmware update fails:

  • You have downloaded the corrupted or wrong Linksys extender firmware file

  • No internet connection

  • Faulty extender’s hardware

  • Improper placement of your Linksys extender

  • Poor network security

  • You are using the wrong or incorrect extender login details to get into the extender.linksys setup page

  • Maybe you have used a damaged or worn out Ethernet cable to connect your Linksys extender and router

  • You haven’t followed the correct steps to update Linksys extender firmware

So, now that you have come to know the reasons behind Linksys extender firmware update failure error. Without further ado, let’s take you through the solutions to fix the issue in a fly. Without much ado, let’s get started!

Fix: Firmware Update Failure Error

Fix 1: First things first, check the wall socket in which your Linksys extender is plugged in. Just in case, you find any fault in the wall plug, change it right away and plug your Linksys device into another working and damaged-free wall outlet.

Fix 2: The next thing that you have to do is to check the power adapter of your Linksys WiFi extender. The power adapter must be working well.

Fix 3: Your Linksys WiFi extender must be placed in the reach of your main router. It is also suggested that you avoid placing your extender and router too closer. Doing so will somehow clash the WiFi signals of your devices. Do not place your devices closer than 30 feet. Also, do not go beyond 50 feet.

Fix 4: Check the WiFi connectivity on your range extender and router. In the event that you find any connectivity issue, get it fixed by immediately by contacting your internet service provider.

Fix 5: Make sure to set up your Linksys WiFi range extender in a proper manner. Access the Linksys WiFi setup page and follow the on-screen instructions.

Fix 6: Don’t forget to remove viruses and malware from your client devices.

Fix 7: Assign a static IP to your desktop or laptop.

Fix 8: Make sure to complete the Linksys extender setup process properly.

Fix 9: Make sure to download and install the correct firmware version as per the model number of your Linksys extender.

Fix 10: Connect your Linksys extender to your router in a wireless manner or using a non-damaged Ethernet cable

Fix 11: Use the correct extender login credentials to access the firmware update page.

Fix: 12: Do not enter the web address, extender.linksys in the search bar of your internet browser.

Just in case, you are still getting the firmware update failure error, perform the Linksys extender reset process once. To initiate the reset process, follow the instructions outlined underneath:

Step 1: First thing first, disconnect your Linksys WiFi range extender from the main router and your client devices.

Step 2: Keep your Linksys extender plugged in. Be certain that the extender is getting continuous power supply from its wall outlet.

Step 3: Once you’re done, locate the Linksys extender reset hole.

Step 4: Press and hold it using a pin or a paper clip.

Step 5: Wait for the Linksys extender’s power LED to become green and stable.

Congrats! You have successfully reset your Linksys extender.

Step 6: Now, connect your router to the Linksys extender.

Step 7: Navigate to the Linksys’s official site – follow the on-screen instructions and update the extender’s firmware.

Bonus: Access the Linksys router login web page using the router’s default IP and follow the instructions on-screen if you want to update the firmware version to the most recent version of Linksys router.


If the aforementioned fixes doesn’t helped you out in fixing Linksys extender firmware update error, drop your concerns into the comments section.

By 12disruptors Admin

Leave a Reply

Your email address will not be published. Required fields are marked *