Detailed Guide to Fix TP-Link Device Keeps Disconnecting Issue

Does your TP-Link WiFi repeater keep dropping connection every now and then? Well, that isn’t good news. But, worry not because this issue can be resolved with not just one but using several troubleshooting hacks. So, continue reading this post and learn how to get rid of the TP-Link repeater keeps disconnecting issue in a jiffy.

But, before you do that, understand what might have led you to the issue in the first place. That way, you’ll be able to troubleshoot it in a much more efficient manner.

Why Does Your Repeater Keep Disconnecting?

Highlighted below are some of the topmost reasons that might be forcing your TP Link repeater to disconnect:

  • Your TP-Link repeater is not getting a fluctuation-free power supply.
  • The Ethernet cable connecting your repeater and router is damaged.
  • There is some issue from the side of your Internet Service Provider.
  • The firmware of your repeater is not running on an updated version.
  • The signals of your tplinkrepeater are getting interrupted or blocked.
  • Technical glitches can also lead you to the issue you are currently facing.
  • The gap between your repeater and your home router is immense.

Keep reading this post and learn how to troubleshoot the TP-Link repeater keeps disconnecting issue.

Fixed: TP-Link Repeater Keeps Disconnecting

  1. Reboot Your TP-Link Repeater

Follow the instructions mentioned below and get to know about the process to reboot your TP-Link wireless range extender:

  • Turn off your TP-Link repeater and unplug it from its power socket.
  • Wait for a few seconds.
  • Plug your TP-Link repeater back into its power socket and turn it on.

Now, check whether the TP-Link repeater keeps disconnecting issue persists. Does it? Well, in that case, continue reading this post.

  1. Verify the Ethernet Connection

Check the Ethernet cable connecting your TP-Link wireless repeater and your home router. If it is damaged from any point, consider getting it replaced with a new one immediately or connect your devices with the help of a wireless source.

  1. Bring Your Devices Closer

As mentioned earlier, too much distance between your WiFi devices can also lead you to the TP-Link repeater keeps disconnecting issue. Therefore, make sure that your repeater as well as your router is placed in close proximity. But, not too close, or else their WiFi signals might clash leading your further technical issues.

  1. Check the Power Supply

The wall socket into which your TP-Link wireless repeater is plugged should not be damaged. If, it is, consider plugging your device into a different wall socket.

Are you still struggling with the repeater keeps disconnecting issue? Looks like you still are in the need of our assistance.

  1. Perform TP-Link Firmware Update

Updating the firmware of your device can also help you get rid of the TP-Link repeater keeps disconnecting issue. Thus, follow the guidelines outlined below and learn how to update the firmware of your device to the latest version:

  • Access
  • Log in to your TP-Link repeater using the default login credentials.
  • Once logged in, head over to the Settings menu.
  • Click the System Tools option.
  • Select Firmware Upgrade.

In some time, your wireless device will automatically reboot signaling your device has successfully been updated.

  1. Avoid Signal Interference

Make sure that your TP-Link wireless repeater as well as your home router is placed away from cordless phones, washing machines, baby monitors, mirrors, fish tanks, Bluetooth speakers, treadmills, televisions, refrigerators, microwave ovens, corners, aluminum studs, utensils containing water, and concrete walls.

  1. Reset Your TP-Link Repeater

Did none of the aforementioned troubleshooting tips help you get rid of the TP-Link repeater keeps disconnecting issue? Well, in that case, you are left with no other than to restore your device to the factory default mode.

Here is how you can reset your wireless device:

  • Locate the Reset button on your TP-Link WiFi repeater.
  • Grab a pointy object and use it to press the Reset button.
  • Hold on for a few seconds.

Once you are done resetting your TP-Link repeater, reconfigure it by accessing the login page.

Wrap Up

Hopefully, the troubleshooting steps mentioned in this post will help you resolve the TP-Link repeater keeps disconnecting issue. Whether they did or not, do let us know via the comment section.

By 12disruptors Admin

Leave a Reply

Your email address will not be published. Required fields are marked *